beautypg.com

AltiGen MAXCS 7.0 Update 1 MultiVOIP Configuration User Manual

Page 4

background image

MAXCS 7.0 Update 1MultiVoIP Configuration Guide

Page 4 of 27

2.

Select Configuration > Call Signaling > SIP. Set Signaling Port to 5060.

3.

Select Configuration > Call Signaling > NAT Traversal. In our example, we do not use the STUN

protocol, so the checkbox is cleared.

4.

Select Advanced > Packetization Time.

•

Set G.729@8Kbps to 10 (ms)

5.

Click Copy Channel to copy the setting to all the channels.

See also other documents in the category AltiGen Software: