AltiGen MAXCS 7.0 Update 1 MultiVOIP Configuration - Manual (Page 16)

MAXCS 7.0 Update 1MultiVoIP Configuration Guide Page 16 of 27
Analog extensions behind the MVP gateway are optional. If the analog extensions are required, complete
the steps in the section SIP Extension Configuration before you proceed.
To configure the SIP-Tie Trunks, follow these steps:
1. Open MaxCS Administrator and select System > System Configuration > First Digit Assignment.
2. Assign digit 8 to IP Trunk Access.
1. Select PBX >Trunk Configuration >General.
2. Highlight one of the SIP-Tie trunks.
3. Set Trunk Access Code to 8.
4. Use the Apply To button to apply the settings to rest of the SIP-Tie trunks.