AltiGen MAXCS 7.0 Update 1 MultiVOIP Configuration - Manual (Page 10)

MAXCS 7.0 Update 1MultiVoIP Configuration Guide Page 10 of 27
Follow these steps to configure the SIP extensions:
1. In MaxCS Administrator, select Extension Configuration.
2. Add two virtual extensions, 251 and 252, with the following parameters:
• For Type, select IP Extension
• Check Enable IP Extension
• Select Static IP Address
• Set Static IP Address to 10.10.101.81 (the IP address of the MultiVoIP gateway)
3. Open the MultiVoIP configuration tool.
4. Select Configuration > Voice/Fax and configure these parameters:
• Set Select Channel to Channel 01
• Set DMTF to Out of Band - Fixed Duration
• Set Out of Band Mode to SIP Info
• Set Coder to Manual
• Set Selected Coder to G.729@8kbps
• Set Auto Call/OffHook Alert to None
5. Click Copy Channel to apply the settings to all channels.