AltiGen MAXCS 7.0 Update 1 MultiVOIP Configuration - Manual (Page 19)

MAXCS 7.0 Update 1MultiVoIP Configuration Guide Page 19 of 27
To configure outgoing PSTN call via Out-call routing, follow these steps:
1. Log into MaxCS Administrator and select PBX > Trunk Configuration.
2. Set all analog trunk Access Codes to None (the H.323-Tie or SIP-Tie trunk access code should still
be “8”).
3. Select System > System Configuration > First Digit Assignment.
4. Assign digit 9 to Route Access.
5. Select PBX > Out Call Routing Configuration > Route Definition.
6. Add a new entry named Local Trunk.