Pulsafeeder Digital Glycol Feeder DGF2 - Manual (Page 26)

21
2.2.2.1.6 Connecting main power (“CE” approved)
1. Connect the main power to the line filter using the wire nuts that were provided with your
Digital Glycol Feeder as shown in Figure 19, Main Power Connections (CE) Approved
below:
a) Brown = Hot
b) Blue = Return
c) Green/Yellow = Ground
Figure 19 – Main Power Connections (CE) Approved
2. The wires from the line filter to J4, pins 1, 2, & 3 will be connected at the factory.