Anritsu ME7840A - Manual (Page 74)

q Autoscale Checkbox: Turns autoscale on or
off. Autoscale automatically scales the mea-
surement results.
q Reset/Zoom: Disabled for this test.
q Max/Min: Type in maximum and minimum
display value. Use Rescale after changing val-
ues.
q Rescale: Rescales the measurement results.
q Pause/Go: Pause stops data transfer from
VNA to PC and places MS462XC in “Local”
mode. Go starts data transfer to MS462XC in
“Remote” mode.
Markers Screen Options (left):
q Markers slider: Moves marker between data
points.
q Power In Reading: Indicates the input power
value.
q Pout F1: Power output at frequency 1.
q Pout F2: Power output at frequency 2.
q IM3U: Intermodulation product 3 upper side-
band
q IM3L:Intermodulation product 3 lower side-
band
q IM5U:Intermodulation product 5 upper side-
band
q IM5L:Intermodulation product 5 lower side-
band
q IM7U:Intermodulation product 7 upper side-
band
q IM7L:Intermodulation product 7 lower side-
band
q PAE: Power-added efficiency percentage.
q Drain: Drain current value.
NOTE
PAE and Drain may be on or off according to check
box in parameter screen.
OPERATIONS, MEASUREMENT POWER SWEEP, TWO TONE
ME7840A OMM 5-13