Chapter 2 installation, Introduction 2-1, Equipment complement 2-1 – Anritsu ME7840A User Manual
Page 27: Unpacking and inspection 2-1, Recommended test equipment 1-15, Recommended items -15, User supplied items -15

Chapter 2
Installation
2-1
INTRODUCTION
This chapter describes the installation, connection and set-up of the
equipment that comprises the ME7840A Power Amplifier Test Station.
2-2
EQUIPMENT
COMPLEMENT
The ME7840A is made up of the following pieces of equipment:
q
Scorpion
â Vector Network Measurement System (VNMS), Direct
Receiver Access (DRA) version:
Model MS4622C (10 MHz to 3 GHz) or
Model MS4623C (10 MHz to 6 GHz)
q
Model MS4782X Power Amplifier Test Set
q
System measurement software
q
Current probe(s) (optional item)
q
One or more external circulators (optional item, for use with
MS4782D Test Set
q
Accessory Kit: Includes interconnect cables and 50
W terminations
for Aux ports
2-3
UNPACKING and
INSPECTION
The ME7840A equipment has been securely packaged. The packaging
material and container should be retained in case the equipment must be
re-shipped or placed into storage.
The MS4622C or MS4623C DRA Scorpion
â VNMS and the MS4782X
Test Set are each packed within heavy cardboard boxes.
Step 1.
Carefully cut the sealing tape on the top box surface with a
packing knife.
Step 2.
Open the box lids, and remove the upper layer of foam mate-
rial.
Step 3.
Lift the equipment from the boxes. Two persons should do
this, as the equipment is heavy and bulky.
ME7840A OMM
2-1