beautypg.com

Working with a matrix – Analog Way Axion2 User Manual

Page 40

background image

If you are working with a matrix in your setup, you must add it to your

show. To do so, follow these few steps:
1/

On the

Axion2

touch screen, press Matrix Setup to enter the

Matrices page.

2/

Press Add, then press Edit if you wish to rename your matrix.

3/

From the Type dropdown menu, select the type of matrix you

are using.

4/ Select the connection protocol in the Connection panel (we

recommend using TCP).

5/

Press LAN settings to enter the LAN settings page, and

configure the LAN settings accordingly.

* TIP * : please be sure your LAN settings correspond to those of

your matrix device. Many matrices do not support LAN. You will need

an adapter.

6/

Press the

[OK]

button to return to the Matrices page, which

should now display the matrix you just configured.

7/

Press the

[OK]

button again to return to the

Axion2

show page.

Once the matrix has been added, you must add the slave device to

a Screen.

1/

Select the Screen you wish to work in, and press Screen Setup

on the touch screen.

2/

Press Edit if you wish to rename the Screen, and choose the

slave device type from the Type dropdown menu.

3/

Press Edit Devices, then press Add on the Device Setup page.

4/

Press Edit if you wish to rename your device, then select the

connection protocol for the device.

5/

Press LAN Settings to configure the IP address and port of the

device.

6/

Press the

[OK]

button twice to return to the Devices page,

which should now display the device you have configured.

7/

Press the

[OK]

button to return to the Screen Setup page.

WORKING WITH A MATRIX

6-1. MATRIX SETUP

6-2. MATRIX CONFIGURATION

38