Analog Way Axion2 - Manual (Page 39)

The [TAKE CUT] button has exactly the same function as the [TAKE]
button, other than it overrides all transitions between presets with
a cut effect. For example, a PIP with a slide in from left effect, will
simply appear onscreen in its final position, without executing the
effect.
The [TOGGLE PRESET] in the Axion2 allows you to activate an
automatical Step Back function. When you take your preset, the old
preset on the main becomes your preview preset.
The timing feature allows you to put a time restriction in the preset
evolution. Every transitions initially superior to the chosen value will
be automatically limited to the desired timing. At any time, just twist
the timing button in order to adjust the timing limitation.
This function is very useful when you have many presets transition
in a live event and you haven’t time to setup each transition one by
one.
The QUICK FRAME button of the Axion2, allows the instant display
of a stored emergency frame above all layers. Enable or disable
this function, by long pressing the
BKGND FRAME button.
Visit the Controls page (Screen Setup) for configuring the Quick
Frame for the current screen.
NOTE: This function requires Eikos², Saphyr, SmartMatriX², Pulse²,
QuickMatriX and QuickVu.
Take Cut
Toggle Preset
Timing
Quick Frame
37