GLOBALSAT TR-206 - Manual (Page 9)

8
2.5 Format of Report Message
Report message is generated by the TR-206 to inform the application server
of its location and status. There are three types of GPRS report message
format, “format 0”, “format 1” and “format 2”.
Report format 0 (GSr,…) & format 1 (GSh,…) are configurable reports. They
are composed of report prefix and report parameters which are described
in section 2.6.
Report format 2 contains cell ID and status information. It is used as a
replacement of format 0 when GPS fix is not available. The format of report
format 2 is not configurable.
Please refer to “Chapter 12. Report” for detailed definitions.
For example:
TR-206 -> Server (format 0)
If configuration parameter O3= SORPZAB27GHKLMN*U!, then the report is
GS r ,IMEI,Device_Mode,Report_Type,Alarm_Status,Geofence_status,GPS_F
ix,UTC_Date,UTC_Time,Longitude,Latitude,Altitude,Speed,Heading,Numbe
r_of_Satellites,HDOP,Battery_capacity*checksum!
TR-206 -> Server (format 1)
If configuration parameter ON= SPAN*U!, then the report is
GS h ,IMEI,Alarm_Status,GPS_Fix,Battery_capacity*checksum!
TR-206 -> Server (format 2)
GS d ,IMEI,Device_Mode,Report_Type,Alarm_Status, Date,Time,Battery_capacity.
“MCC
1
,MNC
1
,LAC
1
,CID
1
,BSIC
1
,RSSI
1
”,
“MCC
2
,MNC
2
,LAC
2
,CID
2
,BSIC
2
,RSSI
2
”,
“MCC
3
,MNC
3
,LAC
3
,CID
3
,BSIC
3
,RSSI
3
”,…*checksum!