GLOBALSAT TR-206 - Manual (Page 82)

81
Code word Parameters Value Description
A5 Enable simple command 1/0
0=disable
1=enable
OU
Password for simple
command and PC utility
Char(16)
Example 1, set the password to be “VICTORY” and enable simple command
The command is “GSS,011412000010789,3,1,OU=VICTORY,A5=1*7e!”
Example 2, cancel the password of TR-206.
The command is “GSS,011412000010789,3,1,OU=*5b!”
Example 3, ping TR-206 and set the tolerance time of GPS fix as 3 minutes. The
password is 520JX
The command is “520JX,PI=180”
Example 4, switch TR-206 to motion mode and set the moving report interval as 30
seconds and static report interval as 30 minutes. The password is 7777.
The command is “7777,MM=30,MS=1800”
Example 5, set voice monitor phone number to 0920123456. There is no password.
The command is “VM=0920123456”
Example 6, make TR-206 link to server. And there is no password.
The command is “LI”
Example 7, switch TR-206 to standby mode. And there is no password.
The command is “SP”