GLOBALSAT TR-206 - Manual (Page 63)

62
7.3.4 Dismiss Geo-fence Alarm
TR-206 would send out only one geo-fence alarm report when it violates the
geo-fence rule. The user should dismiss the alarm flag by “Ne” command and
the monitoring of geo-fence will re-start. If geo-fence function is disabled by
“N7” command, the alarm flag will also be cleared.
If you set the alert type of geo-fence as “stay in area” (type 4) or “stay out of
area” (type 5), you could dismiss the geo-fence alarm to check if TR-206 still
stay in the geo-fence area or stay out of the area. After dismissing the
geo-fence alarm, if TR-206 still stays in the geo-fence area or stay out of the
area, TR-206 will send a new report.
Command’s format for dismiss Geo-fence alarm status:
GS C ,Ne*Checksum!
Command Codeword Function
Ne Dismiss Geo-fence Alarm
Example 1:
Dismiss TR-206 geo-fence alarm status
GSC,135097652783615,Ne*6A!