GLOBALSAT TR-206 - Manual (Page 74)

73
them together to form a string and set to “ON”. Then TR-206 will generate
report according to the codeword sequence and translate to corresponding
information.
Parameter’s Codeword Description
ON Report format 1
(Refer to “2.6. Parameters of Report Messages” for details of parameters’
definition)
Example 1:
Set TR-206 format of report message for format 1
GSS,131826789036289,3,0,ON=SPAN*U!*15!
Then format 1 report will be in the following format.
GS h ,IMEI,Alarm_Status,GPS_Fix,Battery_capacity*checksum!
Example 2:
Ask TR-206 report “format of format 1”
GSC,131826789036289,3,0,L1(ON)*36!
TR-206 receives the command and report the following message
GSs,131826789036289,3,0,ON=SPAN*U!*66!
12.3 Format 2 of Report Messages
GSM Cell ID is assisted information to get device location. When TR-206 does
not get GPS fix, you could enable TR-206 to report the Cell ID information.
Then the report format of TR-206 will automatically switch from format 0 to
format 2 when TR-206 does not get GPS fix.
The parameter of enabling TR-206 to report the Cell ID is O8. Please note that
report format 1 is not affected regardless of the setting of O8.
Code word Parameters Value Description
O8 Enable/ disable TR-206 to 1/0 0=disable