GLOBALSAT TR-206 - Manual (Page 68)

67
YD
Weekday mask of
alarm clock 2
u8,
xx(hex
digits)
Available when YC=3
00 ~ 7f
Weekday is in hex-digit format which
specifies applicable day in a week,
where bit 0 represents Sunday, bit1
represents Monday, etc.
YE
Prompt message of
alarm clock 2
Char(16)
ZA
Selecting melody
for alarm clock 3
u8
ZB
Alarm time of alarm
clock 3
u32, in
seconds
0 ~ 86400
ZC
Type of alarm clock
3
u8
0=disable, 1=once, 2=daily
3= recurrently (ZD must be set)
ZD
Weekday mask of
alarm clock 3
u8,
xx(hex
digits)
Available when XC=3
00 ~ 7f
Weekday is in hex-digit format which
specifies applicable day in a week,
where bit 0 represents Sunday, bit1
represents Monday, etc.
ZE
Prompt message of
alarm clock 3
Char(16)
Note:
1. XB, YB, ZB starts on A.M. 00:00:00 and ends on P.M. 23:59:59. It is
represented in seconds. For example, AM 03:30:45 =12645 second
2. XC, YC, and ZC are the ringing frequencies of the alarm clock. You
could de-activate the alarm clock by setting XC, YC, ZC to be 0. If you
sets the frequency as recurrently (XC or YC or ZC=3), you must also set
the weekday mask of alarm clock.
3. XE, YE, ZE are for showing the message on TR-206 LCD when alarm
clock rings.
Example 1:
Make TR-206 ring on 04:00:30 (XB=14430) everyday (XC=2) with melody 2 (XA=2)