GLOBALSAT TR-206 - Manual (Page 48)

47
6.3 On-Line Mode
In On-Line mode, TR-206 works in the same way as that of periodic mode except
it will keep GPRS connection after sending report. If TR-206 detects the GPRS
connection is cut, it will try to connect to server for one time. If it cannot connect
to server, it will re-connect to server at next report time.
Please refer to section “4.3 GPRS connection” for GPRS on-line operation.
The parameters of On-Line mode are listed below.
Code
word
Parameters Value Description
Q0 Report interval 1~4 Giga seconds
Q2 Report Media Media type
Please refer to 2.9
Report media
Q3
Traveled distance for
sending out report
0=disable
1~4Giga
Unit: meter
If you want TR-206 to
send reports according
to traveled distance,
you have to extra make
GPS on. Please refer to
“Chapter 4 GPS.”
Commands format:
GS C ,IMEI,M3*Checksum!
Command Codeword Parameters
M3 On-line mode
Example 1:
Ask TR-206 set on-line report with interval of 60 seconds and report by UDP
GSC,011412000010789,M3(Q0=60,Q2=04)*34!