GLOBALSAT TR-206 - Manual (Page 75)

74
report “cell ID” if it does
not get GPS fix
1=enable
The report format (format 2) of cell ID is
GS d ,IMEI,Device_Mode,Report_Type,Alarm_Status, Date,Time, Battery_capacity,
“MCC
1
,MNC
1
,LAC
1
,CID
1
,BSIC
1
,RSSI
1
”, “MCC
2
,MNC
2
,LAC
2
,CID
2
,BSIC
2
,RSSI
2
”,
“MCC
3
,MNC
3
,LAC
3
,CID
3
,BSIC
3
,RSSI
3
”,…*checksum!
MCC=mobile country code, 3 digits
MNC=mobile network code, 2 or 3 digits
LAC=location area code, 4 hexadecimal digits.
CID=cell identifier, 4 hexadecimal digits.
BSIC=base station identity code, 1 digit or 2 digits.
RSSI=received signal strength indicator, 1 digit or 2 digits.
The number of set of cell information depends on GSM network
environment. The maximum number is 5.
For example:
GSd,131826789036289,4,5,00,260110,103255,"466,92,0A8D,08C6,13,14","466,92,
0A8D,2FD6,15,14","466,92,0A8D,466E,13,12","466,92,0A8D,6D7E,14,11","466,92
,0A8C,E726,11,11"*01!
12.4 SMS Report
If the SMS flag of the report media is enabled when TR-206 is generating report,
a SMS report will be sent to the phone number defined by F0. There’re two
types of SMS message. The first one is the same as GPRS messages described
in the above sections. The second type is a configurable text which is designed
for easy reading. Parameter ‘F2’ is used to control SMS message type.
Codeword Parameters Value Description
F0 SMS return phone number char(20)
F2 SMS format 1/0
0= Same as GPRS format
1= Text format