VEGA LUCOM EDGE router ER75i v2 SL USER’S GUIDE - Manual (Page 8)

EXPANSION PORT MOUNTING
8
Basic delivered set of router includes:
•
EDGE router,
•
power supply,
•
crossover UTP cable,
•
external antenna,
•
clips for the DIN rail,
•
installation CD containing instructions.
In addition to the basics it is possible to deliver:
•
one or two expansion ports RS232, RS485/RS422, ETHERNET, M-BUSD or CNT
(separation columns are in distribution),
Module can be connected only as follows.
PORT1 RS232, RS485/422, ETHERNET, M-BUSD, CNT
PORT2 RS232, RS485/422, M-BUSD
The router standard designed for:
•
mounting to a panel using through holes (only ER75i v2 version),
•
possibility to be put on a work surface,
•
for mounting onto a DIN rail, the clips are included.
2.3. Antenna Connection
The antenna is connected to the router using the SMA connector on the front panel.
External antennas:
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de