VEGA VEGACOM 557 Modbus protocol User Manual
Operating instructions, Vegacom 557 modbus protocol
Table of contents
Document Outline
- Contents
- Safety information
- Note Ex area
- 1 Product description
- 1.1 Application
- 1.2 Configuration
- 1.3 Functions
- 1.4 Type plate
- 1.5 Technical data
- 1.6 Dimensions
- 1.7 Indicating and adjustment elements
- 2 Mounting and electrical connection
- 2.1 Mounting instructions
- 2.2 Mounting in carrier and housing
- 2.3 Wiring plan VEGACOM 557
- 2.4 Mounting and installation instructions with VEGACOM 557AP
- 3 Switch settings on VEGACOM 557
- 3.1 Adjustment of the PC interface
- 3.2 Adjustment of the Modbus interface
- 4 Data image in VEGACOM 557
- 4.1 Image of measured value when connected to DISBUS
- 4.2 Image of the contact inputs/outputs on the DISBUS
- 4.3 Measured value image when connected to LOGBUS
- 4.4 Image of the contact outputs on LOGBUS
- 5 Setup
- 5.1 Setup check list:
- 5.2 Communication structure
- 5.3 Format for the transfer of measured values
- 5.4 Data transmission with Modbus RTU
- 5.5 Data transmission with Modbus ASCII
- Supplement A
- Supplement B