VEGA LUCOM EDGE router ER75i v2 SL USER’S GUIDE - Manual (Page 78)

CONFIGURATION
78
The configuration file name is from parameter Base URL, hardware MAC address of ETH0
interface and cfg extension. Hardware MAC address and cfg extension is connected
automatically and it isn’t needed to enter this. By parameter Unit ID enabled it defines
the concrete configuration name which will be download to the router. When using parameter
Unit ID, hardware MAC address in configuration name will not be used.
Automatic configuration update starts 5 minutes after turning on the router and then
every 24 hours or it is possible to set the time of automatic configuration in parameter Update
Hour. If the entered URL is different configuration than in the router then the router
downloads this configuration and restarts itself.
The changes in settings will apply after pressing the Apply button.
6.26. Change profile
To open the dialog box for changing profile select the Change Profile menu item.
Profile switch is making by press the button Apply. Change take effect after restarting router
by the help of button Reboot in web administration or by SMS message. It is possible select
the standard profile or up to three alternative profiles. It is possible to copy actual
configuration to selected configuration by selecting Copy settings from current profile
to selected profile.
6.27. Change password
To open the dialog box for changing the access password select the Change Password
menu item. The new password will be saved after pressing the Apply button.
In basic settings of the router the password is set on default form root. For higher
security of your network we recommend changing this password.
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de