8e6 Technologies ER 4.0 - Manual (Page 54)

A
DMINISTRATOR
S
ECTION
C
HAPTER
2: C
ONFIGURING THE
ER S
ERVER
46 8
E
6 T
ECHNOLOGIES
, E
NTERPRISE
R
EPORTER
A
DMINISTRATOR
U
SER
G
UIDE
NOTE: After installing the software update, if a message displays
that informs you to reboot the Server, you should select the
Restart Software option on the Shut Down screen.
Shut Down screen
The Shut Down screen displays when the Shut Down option
is selected from the Server menu. This screen is used to
restart or shut down the Server’s software or hardware.
Fig. 1:2-17 Shut Down screen
Server Action Selections
• Restart the Server’s Hardware - The Restart Hardware
option should be selected if the Server box needs to be
rebooted—for example, when applying certain hardware
configurations. You will need to use this option if the box
mode has been changed or after an IP address has been
entered in the Network Settings screen. During the Hard-