Views of the drive, Front view, Rear view – LaCie 2 User Manual
Page 8: Front view 1.3.2. rear view, Lacie network space 2, User manual
LaCie Network Space 2
• DESIGN BY NEIL POULTON
Introduction
User Manual
page 8
1.3. Views of the Drive
1.3.1. Front View
1.
USB Expansion and Backup Port:
The USB port on the front of
the LaCie Network Space 2 is used to connect another exter-
nal USB hard drive, USB key, USB printer, digital camera, or
any other USB mass storage device (ex. mp3 player). Using
the
Copy
page on the Dashboard (see section
), you can back up shares on your LaCie Network
Space 2 to the external disk.
It is also possible to use the LaCie Network Space 2 to back
up an external USB hard drive. Connected hard disks are ac-
cessed similarly to public folders on the network. See sections
4.14. Dashboard: Front USB Port
for more information.
IMPORTANT INFO:
Do not connect the LaCie Network Space 2
directly to your computer via the FRONT USB port. Doing so will not
allow the Network Space 2 to be recognized by your computer. The
front USB port is intended only for connection of other USB storage
devices.
1.3.2. Rear View
1.
Power button
2.
Power supply
3.
Gigabit Ethernet
4.
USB 2.0 Direct Connection
Fig. 01
Fig. 02