LaCie 2 - Manual (Page 54)

LaCie Network Space 2
• DESIGN BY NEIL POULTON
Administering Your LaCie Network Space 2
User Manual page 54
4.16. Reset to Factory
CAUTION: Resetting the product will erase all Dashboard data
such as users, groups, shares, and settings.
If for any reason you wish to reset your hard drive to its out-of-the-
box state, follow the procedure below.
After resetting to default, all files will be moved to a folder called
Recovery in MyShare and so by default will be available only to the
administrator.
1. Make certain that the Network Space 2 is off.
1. Press and hold the power button for 10 seconds. Release the
button when the LED becomes solid red.
2. When the LED begins blinking red, press the button again. (It
will only blink red for five seconds, so you must press the button
again to confirm reset before the end of the five seconds. If you
don’t press the button while the red light is blinking, the drive
will start normally and the reset process will be aborted.)
3. When successfully reset, the Network Space 2 will restart auto-
motically, returning to its factory settings.