LaCie Slim DVD RW - Manual

Setup Steps
1. Connect the primary USB 2.0 A plug (without
the lightning bolt sticker) to your computer.
2. Your drive is ready to use.
Windows users: Right click My Computer and select
Properties>General. Your drive should be listed.
Mac users: In the Apple menu, choose About This
Mac, then More Info. This will open the Apple
System Profiler. Your drive should be listed under the
Hardware category.
NOTE: Your drive must be connected to a USB 2.0
port. Performance is not guaranteed using USB 1.1.
NOTE: The Y cable has
a secondary USB 2.0 A
plug for additional power. Attaching the primary A
plug to most computers will provide ample signal
and power for the LaCie Slim DVD±RW. In the event
that the device does not receive enough power, you
may connect the additional A plug into a second
USB 2.0 port on your computer. Please note that the
secondary plug has a lightning bolt sticker.
See the User Manual for more information.
Quick Install Guide
Slim DVD±RW
Box Content
Note: Please find the User Manual on the CD.
Protect your investment – register for free
technical support at www.lacie.com/register
1. Primary USB 2.0 A plug (signal and power)
2. Secondary USB 2.0 A plug (power only)
3. Mini-USB plug