IBM EGX-400 - Manual (Page 37)

33 Chapter 2 - Basic Operation
2-6. Care and Handling of Memory Cards
Removing a Memory Card
1 Make sure the display shows the top screen.
2 Remove the slot cover.
3 Gently press the card in until it clicks into place,
then pull it out from the memory-card slot.
4 Attach the slot cover.
Do not switch off the power while a memory card is being accessed.
Do not switch off the machine while the display shows a message such as [Now Processing]. Doing so may result in data
corruption or malfunction.
Do not insert or remove a memory card in any of the following circumstances.
◆ After you turn on the machine and before the top screen appears
◆ While the memory card is being accessed (When the display shows a message such as [Now Processing])
◆ While a screen for dating or calling up data is displayed (When the display shows a message such as [Select File])
Doing so may result in data corruption, failure to display the correct file names, or malfunction.
X 0 Y 40700
Z 0 8000RPM
1. 2.