IBM EGX-400 - Manual (Page 12)

8
To Ensure Safe Use
Unpacking, installation, and moving
are operations that must be carried out
by four or more persons.
Failure to do so may result in falling of the
unit, leading to injury.
Use a commercially available brush
to remove metal cuttings.
Attempting to use a
vacuum cleaner to
take up metal cuttings
may cause fire in the
vacuum cleaner.
Do not carelessly insert the hands
while in operation.
Doing so may result in injury.
Do not touch the tip of the blade with
your fingers.
Doing so may
result in injury.
Fasten the spindle, tool, and material
securely in place.
Otherwise they may come loose during cut-
ting, resulting in injury.
Do not operate beyond capacity or
subject the tool to undue force.
The tool may break or fly off in a random di-
rection. If cutting beyond capacity is mistak-
enly started, immediately turn off the EMER-
GENCY STOP switch.
Wear dust goggles and mask during
use.
Cutting dust may scatter, causing bodily in-
jury.
Switch off the machine and unplug the
power cord from the electrical outlet
before performing cleaning or main-
tenance.
Failure to do so may result in injury or elec-
trical shock.
Do not wear gloves, a necktie or wide-
sleeved clothing.
They may become caught in the tool, result-
ing in injury.
Do not touch the tool immediately af-
ter cutting operating stops.
The tool may have become hot due to fric-
tion heat and may cause burns if touched.
Do not operate if a spindle cover is
cracked or broken.
If the spindle is cracked, contact a service
agent immediately for repairs.
Do not touch the spindle motor imme-
diately after a cutting operation has
ended.
Doing so may result in burns.
To Ensure Safe Use