IBM EGX-400 - Manual (Page 34)

30 Chapter 2 - Basic Operation
2-5. Menu Operations
Displaying the Menus
All settings for this machine are made using menus. Pressing the following buttons displays the menu screens.
Basic Menu Operations
When you display the menus, the buttons function as follows.
Moving to the next screen
Pressing this several times eventually returns you to the top screen.
Moving the blinking cursor
You use the blinking cursor to select items. In the example at right,
for instance, you can select either [ON] or [OFF].
Raising and lowering numerical values
Pressing either of these buttons while holding down increases or decreases the value by large amounts. Hold-
ing down the button makes the value change rapidly.
Confirming and executing the selected item
Operations with do not enable settings, they only select the setting values. A setting is
enabled only when you press . When you enable a setting, the item is displayed enclosed in "< >." You also use
this button to execute things and display submenus.
For detailed information on using the menus
☞ See p.104 "Menu Flowchart"
☞ See p.108 "Detailed Description of the Menus"
REVOLUTION
O FF
Main menu
Pause menu (when pressed during cutting)
Copy menu
X/Y-axis origin-point setting menu
Z-axis origin-point setting menu