beautypg.com

Li.rx86lsie, Bsrie, su.qrie, gl.lie, gl.s, Li.tqlt – Maxim Integrated DS33R11 User Manual

Page 172: Li.tqht

background image

DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver

172 of 344

Register Name:

LI.RX86LSIE

Register Description:

Receive X.86 Interrupt Enable

Register Address:

123h


Bit

# 7 6 5 4

3

2

1 0

Name - - - -

SAPINE01IM

SAPINEFEIM

CNE3LI

M

ANE4IM

Default

0 0 0 0

0

0

0 0


Bit 3: SAPI Octet not equal to

LI.TRX86SAPIH

Interrupt Enable (SAPINE01IM) If this bit is set to 1,

LI.RX86S.SAPIHNE will generate an interrupt.

Bit 2: SAPI Octet not equal to

LI.TRX86SAPIL

Interrupt Enable (SAPINEFEIM) If this bit is set to 1,

LI.RX86S.SAPILNE will generate an interrupt.

Bit 1: Control not equal to

LI.TRX8C

Interrupt Enable (CNE3LIM) If this bit is set to 1, LI.RX86S.CNE will

generate an interrupt.

Bit 0: Address not equal to

LI.TRX86A

Interrupt Enable (ANE4IM) If this bit is set to 1, LI.RX86S.ANE will

generate an interrupt.

Register Name:

LI.TQLT

Register Description:

Serial Interface Transmit Queue Low Threshold (Watermark)

Register Address:

124h

Bit

# 7 6 5 4 3 2 1 0

Name TQLT7 TQLT6 TQLT5 TQLT4 TQLT3 TQLT2 TQLT1 TQLT0
Default

0

0

0

0

0

0

0

0

Bits 0 - 7: Transmit Queue Low Threshold (TQLT[0:7]) The transmit queue low threshold for the connection, in
increments of 32 packets of 2048 bytes each. The value of this register is multiplied by 32 * 2048 bytes to
determine the byte location of the threshold. Note that the transmit queue is for data that was received from the
Serial Interface to be sent to the Ethernet Interface.


Register Name:

LI.TQHT

Register Description:

Serial Interface Transmit Queue High Threshold (Watermark)

Register Address:

125h


Bit

# 7 6 5 4 3 2 1 0

Name TQHT7 TQHT6 TQHT5 TQHT4 TQHT3 TQHT2 TQHT1 TQHT0
Default

0

0

0

0

0

0

0

0

Bits 0 – 7: Transmit Queue High Threshold (TQHT[0:7]) The transmit queue high threshold for the connection,
in increments of 32 packets of 2048 bytes each. The value of this register is multiplied by 32 * 2048 bytes to
determine the byte location of the threshold. Note that the transmit queue is for data that was received from the
Serial Interface to be sent to the Ethernet Interface.