Maxim Integrated DS33R11 - Manual (Page 149)

DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver
149 of 344
Register Name:
RBECB0R
Register Description: Receive Bit Error Count Byte 0 Register
Register Address: 94h
Bit
# 7 6 5 4 3 2 1 0
Name BEC7 BEC6 BEC5 BEC4 BEC3 BEC2 BEC1 BEC0
Default 0 0 0 0 0 0 0 0
Bits 0 - 7: Bit Error Count (BEC[0:7]) Lower eight bits of 24 bits. Register description below.
Register Name:
RBECB1R
Register Description: Receive Bit Error Count Byte 1 Register
Register Address: 95h
Bit
# 7 6 5 4 3 2 1 0
Name BEC15 BEC14 BEC13 BEC12 BEC11 BEC10 BEC9 BEC8
Default 0 0 0 0 0 0 0 0
Bits 0 - 7: Bit Error Count (BEC[8:15]) Eight bits of a 24 bit value. Register description below.
Register Name:
RBECR2
Register Description: Receive Bit Error Count Byte 2 Register
Register Address: 96h
Bit # 7 6 5 4 3 2 1 0
Name BEC23 BEC22 BEC21 BEC20 BEC19 BEC18 BEC17 BEC16
Default 0 0 0 0 0 0 0 0
Bits 0 - 7: Bit Error Count (BEC[16:23]) Upper 8-bits of the register.
Bit Error Count (BEC[0:23]) These twenty-four bits indicate the number of bit errors detected in the incoming data
stream. This count stops incrementing when it reaches a count of FF FFFFh. The associated bit error counter will
not incremented when an OOS condition exists.
Register Name:
RBCB0
Register Description: Receive Bit Count Byte 0 Register
Register Address: 98h
Bit
# 7 6 5 4 3 2 1 0
Name BC7 BC6 BC5 BC4 BC3 BC2 BC1 BC0
Default 0 0 0 0 0 0 0 0
Bits 0 - 7: Bit Count (BC[0:7]) Eight bits of a 32 bit value. Register description below.