Sun Microsystems Sun StorEdge A3500FC Instruction Manuals and User Guides

We have 1 Instruction Manual and User Guide for Sun StorEdge A3500FC Sun Microsystems

Sun Microsystems Sun StorEdge A3500FC User Manual, 62 pages

Recognized languages:	English
Pages:	62
Size:	799 KB

Show table of contents

Document Outline

Sun StorEdge™ A3500/A3500FC Hardware Configuration Guide
Contents
- 1. SCSI Host Connections11
- 2. FC-AL Host Connections21
- 3. Sun StorEdge A3500/A3500FC Configurations31
- A. Sun StorEdge A3500 and A3500FCSpecificationsA-1
  - Preface
How This Book Is Organized
Using UNIX Commands
Typographic Conventions
- TABLEP1 Typographic Conventions
Shell Prompts
- TABLEP2 Shell Prompts
Related Documentation
- TABLEP3 Related Documentation
Sun Documentation on the Web
Sun Welcomes Your Comments
- 1
- SCSI Host Connections
1.1 Configuration Guidelines
1.2 Supported SCSI Host Configurations
- 1.2.1 Single Host Connected to One Controller Module
  - FIGURE11 One Host Connected to One Controller Module
- 1.2.2 Two Controller Modules Daisy-Chained to One Host
  - FIGURE12 Two Controller Modules Daisy-Chained to One Host
- 1.2.3 Independent Controller Module Connected to Two Hosts
  - FIGURE13 Independent Controller Module Connected to Two Hosts
- 1.2.4 Multi-Host
  - FIGURE14 Two-Node Multi-Host Configuration
1.3 Ultra 2 Host System Power Connection Requirement
- FIGURE15 AC Power Sequencers—Ultra 2 Power Connector
- 1. Gain access to the AC power sequencers.
- 2. Route the power cable from the Ultra 2 host under the expansion cabinet frame on the same side...
- 3. Connect the power cord from the Ultra 2 host into the top power connector of either power sequ...
- 4. Reassemble the expansion cabinet.
- 2
- FC-AL Host Connections
2.1 Configuration Guidelines
- FIGURE21 Differential SCSI Terminators on Rear of Controller Module
2.2 Supported FC-AL Host Configurations
- 2.2.1 Single Host Connected to One Controller Module
  - FIGURE22 One Host Connected to One Controller Module
- 2.2.2 Independent Controller Module Connected to Two Hosts
  - FIGURE23 Independent Controller Module Connected to Two Hosts
- 2.2.3 Single Host Connected to One Controller Module Using Hubs
  - FIGURE24 Single Host Connected to One Controller Module Using Hubs
- 2.2.4 Single Host Connected to Two Controller Modules Using Hubs
  - FIGURE25 Single Host Connected to Two Controller Modules Using Hubs
- 2.2.5 Single Host Connected to Four Controller Modules in a Loop Using Hubs
  - FIGURE26 Single Host Connected to Four Controller Modules in a Loop Using Hubs
- 2.2.6 Multi-Host
  - FIGURE27 Two Hosts Connected to Two Controller Modules Using Hubs
2.3 Setting the Loop ID
- 1. Locate the 16 pins on the rear of the FC-AL controller module (FIGURE28).
- 2. Wearing the antistatic wrist strap, install jumpers on the pins as shown in FIGURE28.
  - FIGURE28 Controller Module FC-AL ID Settings
- 3
- Sun StorEdge A3500/A3500FC Configurations
3.1 StorEdge D1000 Disk Array Settings
- FIGURE31 StorEdge D1000 Disk Array
- 3.1.1 1x2 Configuration
- 3.1.2 1x5 Configuration
- 3.1.3 2x7 Configuration
- 3.1.4 3x15 Configuration
3.2 1x2 Cables and Connections
- 3.2.1 Driveside SCSI Connections
- 3.2.2 Power Connections
  - FIGURE313 One StorEdge A3500 Controller Module and Two StorEdge D1000 Disk Arrays (Power)
  - FIGURE314 Two StorEdge D1000 Disk Arrays and One StorEdge A3500 Controller Module (Power)
3.3 1x5 Cables and Connections
- 3.3.1 Driveside SCSI Connections
  - TABLE37 Controller Module A (1x5) Cables
  - FIGURE315 One StorEdge A3500 Controller Module and Five StorEdge D1000 Disk Arrays (SCSI)
- 3.3.2 Power Connections
  - FIGURE316 One StorEdge A3500 or A3500FC Controller Module and Five StorEdge D1000 Disk Arrays (...
3.4 2x7 Cables and Connections
- 3.4.1 SCSI Cable Lengths
- 3.4.2 Power Connections
  - FIGURE318 Two StorEdge A3500 or A3500FC Controller Modules and Seven StorEdge D1000 Disk Arrays...
3.5 3x15 Cables and Connections
- 3.5.1 SCSI Cable Lengths
- 3.5.2 Connections Between Power Sequencers
  - FIGURE322 Connecting the Power Sequencers
- 3.5.3 Connections to AC Power Sources
  - FIGURE323 Power Connections to Avoid (Different Phases)
  - FIGURE324 Power Connections to Avoid (Same Phase)
- 3.5.4 Power Connections for Expansion Cabinets
A.1 Initial Cold Start Surge Current Specifications
- TABLEA1 Device Surge Current Specifications
- TABLEA2 Cabinet Surge Current Specifications

Popular Brands

Popular manuals