Hitachi VT-F462A - Manual (Page 65)

TIMER RECORDING
65
TIMER RECORDING (cont.) pg. 42
10. Press four digits, two for the hour and two more for a minute (for example, "0" "7" "3" "0" for 7:30).
PROGRAM 1
CH 04
START TIME 06:00 PM
PRESS TAPE SPEED
END TIME 07:30 PM
START DATE 12/20/92 SUN
TAPE SPEED EP
FILL IN BLINKING SPACE
PRESS CLEAR TO CORRECT
*TO END PRESS GUIDE
11. Press four digits (two for the month and two for the day) (for example, "1" "2" "2" "4" for begin
recording on December 24). If you want to select the recording speed, press TAPE SPEED button to
select the desired speed.
PROGRAM 1
CH 04
START TIME 06:00 PM
PRESS TAPE SPEED
END TIME 07:30 PM
START DATE 12/24/92 THU
TAPE SPEED EP
FILL IN BLINKING SPACE
PRESS CLEAR TO CORRECT
*TO END PRESS GUIDE
12. Press the GUIDE button to enter your program and return to the programming "menu" display.
Additional programs may be entered by repeating Steps 5 through 11.
If you have no further programs to enter, press the GUIDE button twice.
SELECT NUMBER 1 TO 7
1 VCR PLUS RECORDING
2 DELAYED RECORDING
3 PROGRAM REVIEW
4 INITIAL SETUP
5 CLOCK SET
6 VCR PLUS SETUP
7 PROBLEM GUIDE
*TO END PRESS GUIDE
13. Turn off VCR power.
Now recording will begin automatically at the start time.
Note: To stop a timer recording in progress with the VCR, press POWER button and then press STOP button
within 10 seconds.