Hitachi VT-F462A - Manual (Page 25)

SETTING THE CLOCK
25
SETTING THE CLOCK
Things to know before starting
• The clock uses the 12-hour system. (Be aware of AM and PM.)
• When you first plug in your VCR, the clock will read "--:--".
• While you are setting the clock, the "menu" display on the TV screen will prompt you through the
procedures.
• If you press a wrong digit, press GUIDE button and restart the procedure from the beginning.
1. Turn on the power of both VCR and TV.
2. Be sure that the TV is set to the video channel (channel 3 or 4). (See page 17.)
3. Aim the remote control unit at the receiver on the front panel of the VCR.
4. Press the GUIDE button until the "MENU", as illustrated, appears on the TV screen.
Original menu
SELECT NUMBER 1 TO 7
1 VCR PLUS RECORDING
2 DELAYED RECORDING
3 PROGRAM REVIEW
4 INITIAL SETUP
5 CLOCK SET
6 VCR PLUS SETUP
7 PROBLEM GUIDE
*TO END PRESS GUIDE
NOTE: If the menu does not appear when the GUIDE button is pressed, press the VCR 1 button and then the
GUIDE button.
5. Press "5" button to set the clock.
CLOCK SET
TIME
--:--
MONTH/DAY/YEAR
DATE
--/--/--
FILL IN BLINKING SPACE
*TO END PRESS GUIDE
6. Set the hour by pressing two number buttons on the remote control unit and two more for the minute
(for example, 0 2 1 5 for 2:15).