Hitachi VT-F462A - Manual (Page 16)

CONTROLS AND FEATURES
16
43. F.ADV BUTTON
Press this button during still playback to advance the picture by one frame. Press this button during
playback for forward high-speed search that lasts for about 1 minute of playing time, then goes back to
normal play mode.
44. TRACKING CONTROL BUTTONS
To minimize noise in playback and slow playback.
45. NUMBER BUTTONS "0" THROUGH "9"
Select any channel (whether or not it is in the "Tuner Scan List") by pressing two buttons. (Press "0" and
then "8" for channel 8.) The number buttons are also used for setting the clock and programming the
timer.
46. VCR/TV SELECT BUTTON
Selects the signal to be viewed.
The VCR indicator comes on when the unit is in VCR mode and the signal received by the VCR is
displayed on the TV screen. With the switch in the TV position (indicator light off) the broadcast signal is
received directly by your TV set. When the VCR power is turned off, the VCR automatically switches to
"TV".
CONTROLS AND FEATURES (cont.) pg. 9
47. LIGHT BUTTON
When this button is pressed, the VOLUME, CHANNEL, REW, F.FWD and PLAY buttons light for about 8
seconds.
Note: The VCR1, TV, CATV or VCR2 button lights according to the mode you have selected.
48. 100/ENT BUTTON
Used to select TV or CATV channels.
Press "100", "2", "3" in this order to select channel 123. Press "100", "0" and "5" for channel 105.
49. EDIT BUTTON
Use this button to create an edit program during "Program Easy Edit". See page 50 for details.
50. GO-TO/INDEX BUTTON
Press this button to search for the scene you want to view using the counter GO-TO or INDEX feature.
51. AVX BUTTON
Press to select tuner position to record or view an off-the-air TV program (through the VCR's built-in
tuner) the L1 or L2 (line) position to record or view the program input through the video and audio line
input jacks.
52. DISPLAY BUTTON
1st Press....Calls up the mode display on TV screen.
2nd Press (before display disappears)....The display on TV screen disappears except for "Linear Time
Counter".
3rd Press....The counter memory "M" appears on TV screen.
Also changes the VCR's display from the clock to the counter.
4th Press....Clears the display on TV screen. Also changes the VCR's display from the counter to the
clock.
53. SLOW SPEED BUTTONS
Press the (-) or (+) button to view the pictures at slow speed. During slow playback the slow speed can be
adjusted by pressing the (-) or (+) button.
54. TAPE SPEED SELECT BUTTON
Recording time using Cassette tape T-160: EP: 8 hours SP: 2.6 hours
Notes:
• Playback speed automatically corresponds with recorded speed.