Hitachi VT-F462A - Manual (Page 32)

CHANNEL TUNING
32
3. Select the channel number by pressing buttons "0" through "9". (Press "0" and then "8" for channel 8.)
Press the PLAY button to add channels and the STOP button to erase channels.
Perform the same procedure to add or erase other channel numbers.
CH 08
ADD OR ERASE CHANNEL
SELECT CHANNEL
TO ERASE: PRESS STOP
TO ADD : PRESS PLAY
*TO END PRESS GUIDE
NOTE: Erased channels cannot be selected by the CHANNEL button, but can be selected by buttons "0"
through "9".
4. Press GUIDE button to return to the TV screen.
NOTE: There are some areas where channels cannot be switched when "CATV1" is selected. In this case,
select "CATV2" as in step 6 on the previous page.
Your VCR is capable of receiving "off-the-air" TV channels (VHF 02 - 13, UHF 14 - 69) and CATV
channels 01 - 125, a total of 181 channels*.
* You can receive channels 02 - 13 on both "off-the-air" and "cable" channels. Therefore, the total number
of channels including "off-the-air" and "cable" channels is 181 channels (12 + 56 + 125 - 12 = 181).