Hitachi VT-F462A - Manual (Page 29)

CHANNEL TUNING
29
CHANNEL TUNING
The automatic programming feature makes it easy and convenient to program the TV station into the
tuner's memory.
Automatic programming is usually a "one-time" procedure, but you will need to repeat it if you move to a
location that has different channels, or if the power is interrupted for about 30 minutes.
1. Turn on the power of both VCR and TV.
2. Be sure that the TV is set to the video channel (channel 3 or 4). (See page 17.)
3. Aim the remote control unit at the receiver on the front panel of the VCR.
4. Press the GUIDE button until the "MENU", as illustrated, appears on the TV screen.
SELECT NUMBER 1 TO 7
1 VCR PLUS RECORDING
2 DELAYED RECORDING
3 PROGRAM REVIEW
4 INITIAL SETUP
5 CLOCK SET
6 VCR PLUS SETUP
7 PROBLEM GUIDE
*TO END PRESS GUIDE
NOTE: If the menu does not appear when the GUIDE button is pressed, press the VCR 1 button and then the
GUIDE button.
5. Press button "4" for channel setting
INITIAL SETUP
1 ANTENNA/CABLE
2 AUTO CHANNEL SETTING
3 ADD OR ERASE CHANNEL
4 VCR CODING
5 MOVIE RETURN
6 AUDIO PLAYBACK
7 STEREO/MONO
8 SECOND AUDIO
*TO END PRESS GUIDE