Hitachi VT-F462A - Manual (Page 52)

VCR Plus+ SET UP FOR CONNECTION A 3
52
VCR Plus+ SET UP FOR CONNECTION A (cont.) pg. 34
4. Press the CHANNEL select button so the arrow points to the CHANNEL column next to WCFC (Ind.)
VCR Plus+ channel 3.
VCR PLUS SETUP
VCR+ CH CHANNEL
02 --
03 --
04 --
PRESS CHANNEL ( OR )
*TO END PRESS GUIDE
5. Press "3", then "8".
VCR PLUS SETUP
VCR+ CH CHANNEL
02 --
03 38
04 --
PRESS CHANNEL ( OR )
*TO END PRESS GUIDE
Notes:
• If you enter a wrong number, first press the CLEAR button, then enter the correct number.
• Repeat steps 4 and 5 to assign all local broadcast channels to the VCR Plus+ channels as required.
6. Press the GUIDE button.
The channel set-up operation is now complete and the original menu is on the TV screen.
Channel set-up when using a cable-TV
If cable-TV is connected to your VCR, assign the cable-TV channels to the VCR Plus+ channels listed in
a publication such as TV Guide. The cable-TV channels are listed in the channel line-up chart published
by the cable-TV company.
[Example]
To assign CNN (Cable News Network) to a VCR Plus+ channel using the two channel lists below.