Hitachi VT-F462A - Manual (Page 28)

SETTING THE CLOCK
28
NOTE: Now the display on the VCR will show the correct time.
10. Press GUIDE button once again to return to the TV screen.
NOTES:
1. If you input an illogical time or date (13th month for example), question mark (?) will appear. In this case,
simply input a correct digit.
2. The clock must be set to the correct time before programming the timer for unattended recording or using
the Instant Recording Timer (IRT) feature.
3. The display of Clock Setting procedures will resume the "original menu" if not further steps are followed in
the setting for about 1 minute.
4. If power is interrupted for about 30 minutes "--:--" will appear on the display and Timer and Programming
will need to be reset.