Hitachi VT-F462A - Manual (Page 33)

VCR FUNCTION SETTING
33
VCR FUNCTION SETTING
You can change the VCR mode as required using the "EASY GUIDE SYSTEM MENU".
1. Turn on the power of both the VCR and TV.
2. Be sure that the TV is set to the video channel (3 or 4).
3. Point the remote control unit at the receiver on the front panel of the VCR.
4. Press the GUIDE button until the "menu", as illustrated, will appear on the TV screen.
SELECT NUMBER 1 TO 7
1 VCR PLUS RECORDING
2 DELAYED RECORDING
3 PROGRAM REVIEW
4 INITIAL SETUP
5 CLOCK SET
6 VCR PLUS SETUP
7 PROBLEM GUIDE
*TO END PRESS GUIDE
5. Press button "4".
INITIAL SETUP
1 ANTENNA/CABLE
2 AUTO CHANNEL SETTING
3 ADD OR ERASE CHANNEL
4 VCR CODING
5 MOVIE RETURN
6 AUDIO PLAYBACK
7 STEREO/MONO
8 SECOND AUDIO
*TO END PRESS GUIDE
• The VCR function set menu will appear. Press buttons "4" through "8" to select the required function.
VCR CODING MODE