Hitachi VT-F462A - Manual (Page 37)

CONNECTION WITH A/V TV
37
CONNECTION WITH A/V TV
If your TV has audio/video input jacks, connect it to this VCR as follows; you can enjoy better a picture
and sound.
Connect the antenna, VCR and TV as shown on pages 11 - 17 and then perform the following
connection.
1. Connect the VCR and TV as shown in the figure
2. When you select "VIDEO" by pressing the input select button of the TV, you can view a tape played
back by the VCR or a program selectd by the channel select button of the VCR.
Hi-Fi SOUND
This VCR records sound using the following two formats.
Hi-Fi sound
FM sound is recorded using the rotary audio heads.
Normal (linear) sound
Records in monaural using the same format as with a non-Hi-Fi VCR. Therefore, conventional VCRs can
be used for playback.
Remarkable Specifications of Hi-Fi Sound
• Dynamic range
90 dB
• Frequency response 20 Hz - 20 kHz
• Wow and flutter
0.005% or less
Recording of Multichannel Television Sound
• Stereo programs are recorded in Hi-Fi on both the L and R channels and also recorded on the linear
track as monaural.