Hach sc1000 - Manual (Page 52)

50
Installation
3.11.2 Prepare the storage card
A plain/new storage card has to be prepared first with the ERASE ALL command of the
sc1000 software.
To prepare the storage card:
1. Select SYSTEM SETUP, STORAGE CARD, ERASE ALL.
2. Confirm the message.
3. The sc1000 software removes all files from the storage card and creates the storage
card folder structure ( Table 13 ).
4. The storage card is ready for use.
Table 13 Storage card, folder structure
Folder name Content
dev_setting Configurations and settings
sc1000 Log files, Backup files
update Files for software update