Conditions – Hitachi GR2000 User Manual

Page 244

4.2.12.2

IPv6 function restrictions regarding the routing processing mechanism (RP) mounting
conditions

Replacement of RP by inserting and removing a cock

When replacement of RP is performed by inserting and removing a cock when the
IPv6 function is used, the device requires re-actuation if replaced from RP-C6 to
RP-ALRP-C.RP-D, or from RP-ALRP-C.RP-D to RP-C6 and RP-D6.

New expansion of RP

The device requires re-actuation if RP-C6 and RP-D6 are additionally installed to

Accommodated

RP condition

IPv6 providing function

IPv6 relaying

Filter

QoS

IP tunneling

IPv6 multicast

RP-A1,
RP-CRP-D

S/W processing

None

RM processing

None

RP-C6, RP-D6

H/W processing

RP processing

H/W processing

(Note: 1) If RP-C6 and RP-D6, and RP-ALRP-C and RP-D are mounted in a mixed way, the IPv6 function can only be
used in RP-C6 and RP-D6. The IPv6 function cannot be used in RP-ALRP-C and RP-D.
(Note: 2) RP-CV and RP-DV are not supported in ROUTE -OS6.