HP R707 - Manual (Page 74)

74 HP Photosmart R707 User’s Manual
AE Bracketing
NOTE This setting does not apply in Panorama mode.
This setting allows you to take three pictures with the camera,
with each picture set to a different exposure value. When you
select one of the AE (automatic exposure) Bracketing settings,
the camera will take the first picture at normal exposure ( 0
exposure value), followed by an underexposed picture at the
negative ( - ) exposure value in the setting, and finally an
overexposed picture at the positive ( + ) exposure value in the
setting. The entire sequence of three shots is taken with only
one press of the Shutter button. Use AE Bracketing when you
want to try underexposing and overexposing a shot to get an
image at the best exposure.
NOTE Flash is allowed when you select an AE Bracketing
setting; however, the interval between each of the pictures
in the sequence of three shots will be longer due to flash
recharging.
NOTE If you have selected Burst mode, AE Bracketing is
ignored. Also, when you use AE Bracketing with Self-
Timer - 2 Shots set, the Self-Timer - 2 Shots setting is
essentially ignored and is treated the same as the Self-
Timer mode (only one 3-shot sequence is taken).
1 In the Capture Menu (page 55),
select AE Bracketing .
2 In the AE Bracketing sub-menu,
use the buttons to
highlight a setting.
3 Press Menu/OK to save the
setting and return to the Capture
Menu .