HP R707 User Manual
Page 147
Chapter 7: Troubleshooting and Support
147
F-number and
shutter speed turn
red in Live View
The camera is out
of range for the
selected aperture
or shutter speed.
Select a different aperture
when using the
Aperture
Priority Av
shooting mode.
Cannot display
image
Possibly an
image taken with
another camera
or a corrupt
image file caused
by the camera
not shutting down
properly.
!
The image may still be
okay. Transfer the image
to your computer and try
opening it with the HP
Image Zone software.
!
Do not remove the
memory card when the
camera is turned on.
Camera has
experienced a
fatal error
The camera may
have a firmware
problem.
Turn the camera off and
then on again. If that does
not fix the problem, try
resetting the camera (see
page 124). If the problem
persists, note the error
code and then call HP
Support (see
Unknown USB
device
The camera is
connected to a
USB device that it
does not
recognize.
Make sure that the camera
is connected to a
supported printer or
computer.
Message
Possible cause
Solution