Turning on power, Choosing the language – HP R707 User Manual
Page 17
Chapter 1: Getting Started
17
NOTE
The camera may get warm while it is charging the
battery, as well as after prolonged use under battery
power. This is normal.
NOTE
Digital cameras use batteries at a much faster rate than
film cameras. Battery life in digital cameras can be
measured in hours and minutes of use rather than the
years more typical of film cameras. Battery life may also
vary dramatically from one user to another, depending on
what modes the camera is being used in most frequently.
For hints on optimizing battery performance, see
Appendix A: Managing Batteries
Turning on Power
Turn the camera on by sliding the
ON/OFF
switch to the
right and then releasing it.
The lens extends and the Power/Memory light on the back of
the camera turns on solid green.
Choosing the Language
The first time you turn the camera on, the following screen
appears and prompts you to choose a language.
1
Scroll to the language that you
want by using the
buttons
on the
Controller
.
2
Press the
Menu/OK
button to select
the highlighted language.
NOTE
If you need to change the
language later, you can do this with the
Language
setting
in the
Setup