Charging the battery – HP R707 User Manual
Page 16
16
HP Photosmart R707 User’s Manual
Charging the Battery
NOTE
This section tells how to charge a battery in the camera.
You can also charge the battery in the extra battery bay of
the camera dock or in the HP Photosmart Quick
If the battery you installed is a disposable CP1 battery, you can
skip this step. If the battery you installed is a rechargeable
lithium ion battery, do the following.
1
Plug the power cord into the HP AC adapter. If more than
one power cord is in the box, use the cord that is
appropriate for power outlets in your country. Plug the other
end of the power cord into an electrical outlet.
2
Open the small rubber
door on the side of the
camera.
3
Attach the thin cord from
the AC adapter to the
power adapter connector
on the side of the
camera as shown.The
Power/Memory light on
the back of the camera
will start blinking to show that the battery is charging.
The rechargeable lithium ion battery will usually charge fully in
5-7 hours. When the Power/Memory light stops blinking, the
battery is fully charged, and you can then unplug the power
adapter from the camera. You can continue to use the camera
while the battery is being charged by the power adapter.