Live view at power on, Date & time – HP R707 User Manual
Page 118
118
HP Photosmart R707 User’s Manual
Live View at Power On
This setting allows you to have the camera automatically
display
Live View
every time you turn the camera on, or to have
the Image Display turned off every time.
NOTE
Setting
Live View at Power On
to
Off
can save battery
power.
1
In the
Setup
Menu
select
Live View Setup.
2
In the
Live View at Power On
sub-menu, highlight
Live View
On
or
Live View Off
.
3
Press
Menu/OK
to save the
setting and return to the
Setup
Menu
.
The new setting remains in effect until it is changed again, even
when you turn the camera off.
Date & Time
This setting allows you to set the date/time format, as well as
the current date and time for the camera. This is usually done
when you first set up the camera; however, you may need to
re-set the date and time when you are travelling to different
time zones, or if the date and time is incorrect.
NOTE
The date/time format chosen will be used to display the
date information in
Playback
. Also, this format chosen in
this setting is what is used in the date & time imprint