Focus assist light – HP R707 User Manual
Page 117
Chapter 6: Using the Setup Menu
117
2
In the
Camera Sounds
sub-menu,
highlight the volume level you
prefer.
3
Press
Menu/OK
to save the setting
and return to the
Setup
Menu
.
The new setting remains in effect until
it is changed again, even when you turn the camera off.
Focus Assist Light
Sometimes in low-light situations, the camera will use the red
focus assist light on the front of the camera to aid in focusing.
This setting allows you to turn off this light (for example, when
you do not want the focus assist light to distract the subject of
your picture).
The default
Focus Assist Light
setting is
Auto
.
1
In the
Setup
Menu
select
Focus Assist Light.
2
In the
Focus Assist Light
sub-menu,
highlight
Auto
or
Off
.
3
Press
Menu/OK
to save the
setting and return to the
Setup
Menu
.
NOTE
HP recommends leaving this setting at
Auto
, since
turning it off hinders the ability of the camera to focus
correctly in low light.
The new setting remains in effect until it is changed again, even
when you turn the camera off.