Taking a panoramic sequence of pictures – HP R707 User Manual
Page 50
50
HP Photosmart R707 User’s Manual
Your camera came with the ArcSoft® Panorama Maker™
software that automatically stitches the images in the
panoramic sequence together on your computer during image
transfer. The Panorama Maker software was automatically
installed on your computer during the HP Image Zone software
To transfer the panoramic sequence of images from your
camera to your computer so that the ArcSoft Panorama Maker
software can stitch the images together, see
Taking a Panoramic Sequence of Pictures
1
Press the
Mode
button on top of
the camera until the
Panorama
mode appears in the Image
Display. The camera switches to
Live View
with
displayed in
the Image Display. You are now
ready to take the first picture in
your panoramic sequence.
NOTE
Panorama images are stitched together from left to
right, so your first image must be at the left-most end of
the panorama view.
2
Press the
Shutter
button to take the
first picture in the panoramic
sequence. After
Instant Review
, the
camera switches to
Live View
with
displayed in the Image
Display.