HP R707 User Manual
Page 113
Chapter 5: Transferring and Printing Images
113
NOTE
Printing only works with still images; it does not work
with video clips Also, images within a panoramic
sequence can be printed individually directly from the
camera, but you cannot print an entire panorama from
the camera. To print a panorama, see
1
Check that the printer is turned on. There should be no
blinking lights on the printer or error messages displayed
about the printer. Load paper into the printer, if needed.
2
Connect your camera to the
printer.
•
If you are printing directly
to an HP printer that does
not display the PictBridge
logo (see below), use the
special USB cable for
connecting the camera
directly to an HP printer.
Connect the square end of
that USB cable to the HP printer.
•
If you are connecting the camera to a printer
displaying the PictBridge logo (see right)
from HP or another manufacturer, use the
USB cable that came with your camera for
connecting to the computer, instead. Connect the larger
end of that USB cable to the PictBridge-compatible
printer.
NOTE
HP does not support printers from other manufacturers.
If your printer will not print, contact the manufacturer of
your printer.