HP 220240 - Manual (Page 86)

Chapter 4
Printer Configuration
This chapter describes how to configure the printer by selecting operating
parameters that can be stored in the printer’s memory. These operating
parameters are known as features and values. By selecting the correct
operating parameters, you ensure that the printer can communicate
properly with the host computer and application software.
You configure the DEClaser 2200 plus printer by selecting an appropriate
set of values from a group of printer setup menus. You make these
selections while the printer is in Menu Mode. Once values are selected
you can save them in the appropriate type of memory. Saving features in
the proper type of memory allows you to retain most printer values so that
the printer has to be configured only once. Figure 4–1 shows a sample
menu from Test Print A.
Figure 4–1: Sample of a Menu
MLO-004856 (Figure 4-1; 11.5 picas)
Printer Configuration 4–1