HP 220240 - Manual (Page 131)

Table 6–2 (Cont.): Printer Status Messages
Message Meaning
02 WARMING UP The printer has not reached operating temperature. Printing
cannot be performed while the printer is warming up.
03 RESET The printer is being reset (Section 2.17).
04 TEST STOP Test printing has stopped.
05 TEST PRINT A Test Print A is being printed (Section 2.13).
06 FONT LIST A Font List A is being printed (Section 2.15).
15 ENGINE TEST The mechanical engine test is being executed (Section 2.12).
6.3 Operator Call Messages
Operator call messages are displayed if a problem with the printer requires
operator intervention, such as adding paper or closing the printer cover.
Check the online/offline status of the printer after correcting a problem; you
may have to place the printer back on line by pressing
On Line
. Table 6–3
lists the operator call messages.
NOTE:
The operator call message number flashes when it is displayed.
Table 6–3: Operator Call Messages
Message Meaning Corrective Action
11 PAPER OUT There is no paper in the
paper cassette.
Add paper to the paper cassette
(Section 2.8.1).
There is no paper cassette
installed in the printer,
or the cassette is not
installed securely.
Install the paper cassette securely
into the printer.
12 PRINTER OPEN The top cover of the
printer is open.
Close the top cover (Section 2.4).
13 PAPER JAM Paper is jammed
inside the printer.
Remove jammed paper from the
printer (Section 6.7).
14 NO EP-CART. There is no EP-S cartridge
in the printer.
Install an EP-S cartridge in the
printer (Section 7.3).
Troubleshooting 6–3